| Post 1 made on Wednesday May 31, 2000 at 13:47 |
I was hoping that someone has found away to create direct access to specific tuner presets on the 3300 from the pronto. Does the 'shift' button bring you to a reference point such as A1,B1,C1,D1, etc. to allow this to be used as a workaround? If so, you might be able to assign the same sequence of stations to each memory block. This would limit the number of presets but I don't need 50 stations anyway! Any suggestions would be appreciated!
|
|
| OP | Post 2 made on Wednesday May 31, 2000 at 20:18 |
Tim,
If you look at Denon Receivers under the files section
gary johnson has supplied all the tuner presets for the AV3300 which I've found very useful.
|
|
| OP | Post 3 made on Thursday June 1, 2000 at 11:51 |
Steve,
Thanks for the info- I don't know how I missed that file and dicretes to boot! Any other tips for the 3300 via my email would be apprecitated- Thanks!
|
|
| OP | Post 4 made on Friday June 2, 2000 at 11:52 |
andrew pratt Historic Forum Post |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
