I will be uploading a CCF and Discrete listing soon.

By popular demand here are the elusive sharp codes:

ON
0000 006a 0000 0020 000b 0047 000b 001f 000b 0047 000b 0047 000b 001f 000b 001f 000b 0047 000b 0047 000b 001f 000b 0047 000b 001f 000b 0047 000b 001f 000b 0047 000b 001f 000b 0699 000b 0047 000b 001f 000b 0047 000b 0047 000b 001f 000b 0047 000b 001f 000b 001f 000b 0047 000b 001f 000b 0047 000b 001f 000b 0047 000b 001f 000b 0047 000b 0699

OFF
0000 006a 0000 0020 000b 0047 000b 001f 000b 0047 000b 0047 000b 001f 000b 001f 000b 0047 000b 0047 000b 001f 000b 0047 000b 001f 000b 001f 000b 0047 000b 0047 000b 001f 000b 0699 000b 0047 000b 001f 000b 0047 000b 0047 000b 001f 000b 0047 000b 001f 000b 001f 000b 0047 000b 001f 000b 0047 000b 0047 000b 001f 000b 001f 000b 0047 000b 0699

VIDEO3
0000 006d 0000 0020 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 066b 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 066b

Please let me know if the codes work on the other sharp projectors (37,55,99) I tested them on a 96.

Thanks,

brian

Brian,
You have done it, i've tried the codes on a 37, 55, 96, 99 and they all worked as soon as I can I will try them on the new Z1
Thank You,
Bryan

The codes work on the 37,and the 99 but they don't work on the Z1!!!!!!!!!!
If anyone could help me get the Z1 on off commands I will pay a cash reward!!!!!!!!!!!!

Thanks SO MUCH!!!! Brian, you did it!!!!! The codes work perfectly on the XV55 unit :-)))))

Thanks to both Bryan and Brian! On/Off/V1/V2/V3 worked great on my XV-H37VUA last night!

Brian helped us Sharp owners waaaay much! Thanks maan! I need Video 1 & 2 codes now please. THanks in advance! Any one know a good way to do the toshiba sd 2108 w/o descrete codes?????

James

Can you verify these on the 55U for me? I added the discreet codes for Sharp projector from the Files section, and *none* of them work for me (exception: dicreet on works). No Off, Lens, Menu, directional, or Input.

Question: does the 55U support the discreet input selections? That would be awesome.

Please let me know! I am a hair away from having my HT fully implemented!

Doc

I am also looking for discrete Sharp projector codes for the ZX-W60E (which I believe is called 99 in the US). I belive the discrete on/off codes published above will work for me as well, and since the original remote has separate input keys these are not needed either. However, I would really like codes for lens control (Zoom up/down, Lens shift up/down and Focus up/down) and for Picture Mode (Full, Normal and Wide) to allow my girlfriend direct access to these functions.

Does anyone know if these exist?

Christopher

Brian;

The On and Off you have listed above are identical. Do you have discreet?

Also need In1 and In2.

Does anyone know, or has anyone discovered discrete Shift (+/-), Focus (+/-), and Zoom (+/-)? These would make a complete discrete for Sharp projector line (not incl Z1, apparently).

Doc

No, they're not identical -- "ON" is command 342, "OFF" is command 406.

Huh? You lost me.

Looking at the hex above, only 2 words are different between On and Off: the twelfth word in line 2, and the sixth word in line four.

Maybe this is the difference between '342' and '406', but how do you arrive at those #'s (342, 406)?

I am completely new to IR at this level, and the IR sheet from the utils section frankly passes me by.

Doc

"IR Tool" (available in the File Area) can break Sharp codes down into a readable format. And that's what it says the difference are between those two codes. Remember, it doesn't take much to make an operational difference.

Doc, I also have the XV55, and the On and Off codes do work perfectly on my unit. These as well as the discrete video codes for 1,2,and 3, all work as well.

Doh!

I must apologize. I don't know what I was doing before, but yes, all the codes work perfectly for me as well. Not sure where my short-circuit was, except maybe between seat and keyboard! ;-)

OTOH, I do have a recurring prob with the 'On' code. I have set up a simple macro for watching DVD, TV, or using the PC, and these all start with an alias to the discrete on, just in case. Well, if my 55U is on, no problem. But, if it is off, it only comes on halfway(?). The Power light at the handle goes from red to green, then the LED next to it goes to a *flashing* green. I have to then manually navigate to the Projector controls on my Pronto, or use the projector remote (blech!), and re-send an 'on'. Sending discrete manually on works fine, even from Pronto. What I don't understand is, the macro is aliasing the code that works when I do it manually, but it won't work in the macro.

Doc

PS - In an attempt to fudge a workaround in the macro's, I have also tried sending the discrete 'on' 3 times in a row with no delay. This had no effect.