I have a Sharp XV-H37VUA projector. I haven't seen discrete codes for this exact model but have managed to find Video1 and Video2 codes from other models that work fine with mine.

However, I am still looking for the Video3 input (component video input) code. This happens to be the main input of choice and I would really like to get this working.

i CAN e-mail you a file with what you need
Do you have the Descrete Power On And Off???

I am looking for the Video3 input as well as the on and off. I have a Sharp XV-S96U. I have Video1, Video2, and RGB. I would appreciate it if you would also mail me the discrete code for video3. I have asked around for a sharp remote that has on and off buttons but have yet to find one.

I also have a Sharp XV-S96V. Please email me all of the discrete code for this model.

I have the Sharp 55U. I also am in dire need of the on/off codes. I dont use the v1,v2,v3 sorry I cant be of help

I too need the discrete codes for on/off, etc for the xv55u. Hope someone out there has these!

Posted on my old ccf file
of remotes:
{ Bryan Kujala}
There are video input1,2,3
under Sharp Projector

Man! I really could use the decrete codes for the XV55u Sharp Projector. Need on and off only. I've seen postings that their out there but no one replys to the emails ....... HELP

[email protected]

If you have any sharp projector descrete on/off codes please email them or put your CCF file up labled as sharp codes. Ill try anything now. XV55U needed

JD

on off codes????

I too would like discrete codes for Sharp projectors...

If anyone has discretes for Sharp Rear projection TV, that would be appreciated as well.

Bryan, I had downloaded a ZIP file of yours containing a CCF called stewart. It worked in part but not for the Video3. Screen 3/3 has S-Video, Component, and Composite. S-Video works and translates to Video1 on my Sharp, Composite also works and translates as Video2, but Component does nothing!

I'm not too concerned about the On/Off codes as this only puts the unit into suspend / stand-by mode which I prefer not to use. I always use the hard on/off button. Video3 would be the clincher though!

I also noticed that your composite action had 2 IR/learned codes. What does that mean?

Nigel, Bryan used input2 and a input+ to simulate input3. I have FINALLY!!!!! discovered the discrete input3 command and discrete on and off commands. I will upload them to the ccf or discrete section this week.

If you found on/off discretes you are the new pronto king!!!!!!!!!!!

Brian, I too would VERY much appreciate the discrete on/off codes and the 3 input codes for my Sharp XV55 projector. THANKS in advance for posting them!!