| Post 1 made on Sunday November 2, 2003 at 16:45 |
whmacs Lurking Member |
Joined:
Posts: | November 2003
4 |
|
|
Hi All, This is my first post. On Friday I received my Marantz RC5200. I've down loaded the Touch screen edit program from Marantz's site, but I can't seem to find a user manual for it. Am I missing something? Would this be a good program to get started with (I'm a newbie at this) or should I look at Prontoedit or Tonto as a starting point? Any advice would be greatly appreciated. thanks, Stephen [email protected]
|
|
| Post 2 made on Sunday November 2, 2003 at 22:24 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,798 |
|
|
no use going with PE. Tonto should work with a 5200 so it is your choice. The best advice is just to play with the one you choose and try some CCFs.
|
... |
|
| Post 3 made on Monday November 3, 2003 at 00:12 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
The RCEdit manual (the predecessor to TSS) is a good starting point.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 4 made on Monday November 3, 2003 at 00:21 |
whmacs Lurking Member |
Joined:
Posts: | November 2003
4 |
|
|
Thanks Anthony, I'll give Tonto a go. I also didn't realise that Marantz's edit and ProtoEdit where basically the same software. I've now got a copy of the ProtoEdit manual so this should get me started.
Thanks,
Stephen
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
