| Post 1 made on Friday October 24, 2003 at 10:07 |
dolifant Lurking Member |
Joined:
Posts: | October 2003
2 |
|
|
I am new to the Pronto. I got a Proto Pro 3 days ago. I needed to get a serial to USB converter (Belken) because my computer has no serial port. I properly configured it to COM1, and I was sucessful in updateing the firmware to Ver 1.4. Therefore, I conclude, the serial port works. When I try to upload or download a ccf file, it hangs and says COM1 opened:no response from remote device.
Am I missing something?
|
|
| Post 2 made on Friday October 24, 2003 at 10:48 |
bomberjim Super Member |
Joined:
Posts: | September 2001
3,894 |
|
|
Probably need to tap the Pronto's screen to wake it up just prior to communications. Jim L 
|
Jim L  |
|
| Post 3 made on Friday October 24, 2003 at 11:50 |
RC Geek Advanced Member |
Joined:
Posts: | April 2003
826 |
|
|
Belkin does not play nicely with PE. If you MUST use the Belkin, get Tonto. Otherwise, I'd suggest running to Radio Shack and picking up their generic USB to serial adapter. Also, it must be set to either COM1 or COM2 with PE. Cheers.
|
Having once decided to achieve a certain task, achieve it at all costs of tedium and distaste. The gain in self-confidence of having accomplished a tiresome labor is immense. -----Arnold Bennett |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
