| Post 1 made on Thursday March 6, 2003 at 10:12 |
Southerncentralrain2 Lurking Member |
Joined:
Posts: | November 2002
7 |
|
|
I am a newbie and I have spent the last 2 hours trying to figure this out. I just opened a new Pronto Pro TSU6000. I believe everything is connected OK because Pronto Edit allows me to updoad the CCF from the Pronto but when I try to download a CCF to the pronto I get the following error message:
"Error downloading configuration to RC device"
Any ideas or suggestions? Thanks so much in advance.
Chris
|
|
| Post 2 made on Thursday March 6, 2003 at 11:00 |
bomberjim Super Member |
Joined:
Posts: | September 2001
3,894 |
|
|
Try tapping the screen to wake up the remote just prior to download. Jim L 
|
Jim L  |
|
| Post 3 made on Thursday March 6, 2003 at 12:47 |
sillingw Long Time Member |
Joined:
Posts: | January 2003
14 |
|
|
I had the similar problem - make sure the unit is awake before connecting, it doesn't seem to matter if it goes to sleep during the xfer. Also check on the version of the prontoedit software and of the os for the prontopro - I upgraded both of mine and the invalid ccf messages have gone away - it onlly took me a few minutes to upgrade and the links are on this site.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
