| Post 1 made on Friday February 28, 2003 at 08:24 |
ask-kay Long Time Member |
Joined:
Posts: | February 2003
13 |
|
|
I am having MAJOR issues with the discrete codes for LS110V. I can download them into my RC, but when I merge the file with the existing program to control all of the components NONE of the 110 commands work!
WHY?
|
|
| OP | Post 2 made on Friday February 28, 2003 at 08:49 |
ask-kay Long Time Member |
Joined:
Posts: | February 2003
13 |
|
|
It's me again, I have had a MAJOR breakthrough this morning. I was working this morning, trying again to get the codes to issue the commands, when I noticed something. At a range of 16 feet from my IR receiver with the lights dimmed to 10% the codes would not work. BUT, if I got within 10 feet and had all of the lights completely off, it worked. I know that IR has issues but is it really THIS sensitive?
|
|
| Post 3 made on Friday February 28, 2003 at 11:15 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,798 |
|
|
it depends on the receiver and the lights. some times the receiver is blinded because the lights are emitting in the same spectrum as the receiver. It is a bigger problem with fluorescent lamps then incandescent bulbs.
|
... |
|
| OP | Post 4 made on Monday March 3, 2003 at 09:06 |
ask-kay Long Time Member |
Joined:
Posts: | February 2003
13 |
|
|
Thanks Anthony. Over the weekend I actually got the commands to work. There is something screwy going on because NOW the commands work, but only if I am within 10 feet. 10 feet 2 inches and the projector commands will not work. It's weird but I am stumbling through it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
