 |
 |
|
|
Philips Pronto Classic Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Home Panel Default Settings
| |
|
| Topic: | Home Panel Default Settings This thread has 8 replies. Displaying all posts. |
|
| Post 1 made on Wednesday February 12, 2003 at 18:13 |
I have modified and combined multiple CCF files to a common new CCF. I want the "Home" panel to default at initial power on. In spite of everything it defaults to one of the devices control panels. I have checked jump to and delay settings for everything. Any suggestions?
|
|
| Post 2 made on Wednesday February 12, 2003 at 19:11 |
King of typos Loyal Member |
Joined:
Posts: | June 2002
5,265 |
|
|
Do you want to have the remote bring up a certain page each time the remote is turned on? That is not possible at all.
Or after a download or replace of batteries, or press of the reset button. Does the home page look or act different? From what you have in ProntoEdit? If it does, then you must rename the home panel. You can simpiley change the lower case h to an upper case H in the name "home" to "Home"
Rob
|
|
| OP | Post 3 made on Wednesday February 12, 2003 at 19:47 |
It defaults "only" to a device "Receiver" every time. I can exit back to the home page via the default house bmp on the upper center (left) of the screen. I realize that the screen will usually default to the screen used last.
The operation matches Emulator so I am confident the software is doing its job. I am using 4.05. I just want to see the "Home" panel default at startup "sometimes" vs never.
|
|
| Post 4 made on Wednesday February 12, 2003 at 20:08 |
King of typos Loyal Member |
Joined:
Posts: | June 2002
5,265 |
|
|
Oh that is possible. HOWEVER, in order to do that you must name the home panel "home" all lower case. And you do NOT want to do that. Other wize the remote will make it's own jumps and looks of the home panel. So it's not a good idea.
In other words, your just gonna have to deal with it.
This issue is covered in the FAQs. Go check it out.
Rob
|
|
| Post 5 made on Wednesday February 12, 2003 at 20:12 |
Stephane Advanced Member |
Joined:
Posts: | July 2002
980 |
|
|
sorry no can do the default setting is the first panel of the first device that's it 
|
|
| Post 6 made on Wednesday February 12, 2003 at 20:15 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Greg, you only ever come across this when you download a new configuration. Once your CCF has settled down, it won't be an issue.
As Rob says the FAQ explains the effect for renaming the Home panel and/or disabling Home Page is Write Protected.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 7 made on Wednesday February 12, 2003 at 21:03 |
Everyone,
Thanks for the insight. Stephanie your response gave me the solution. I simply created a new device called "Intro" (it could be named anything as long as "it is first on the device list.") I copied the panel I wanted to default to from the home page with its "jump to" command to the intro device. It works perfect.
This is why they call it a forum. I appreciate the help.
|
|
| Post 8 made on Wednesday February 12, 2003 at 22:01 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
The FAQ tells you which setting combination to use so that it goes to the Home panel rather than the 1st device.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 9 made on Thursday February 13, 2003 at 16:22 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,798 |
|
|
Thanks for the insight. Stephanie your response gave me the solution it's Stephane (male)
|
... |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
