| Post 1 made on Monday January 13, 2003 at 19:52 |
whitelikewhoa Lurking Member |
Joined:
Posts: | January 2003
7 |
|
|
I am having trouble programming the Jvc Rec. to work with the Pronto TSU-2000. The Jvc has a rf remote so it isnt learning it. Does anyone out there have the ir commands for this reciever. I would much appreciate it. Thanks..
|
|
| Post 2 made on Monday January 13, 2003 at 20:11 |
King of typos Loyal Member |
Joined:
Posts: | June 2002
5,265 |
|
|
Two things..
First are you sure it can be controled via ir. Since the oem is rf.
Second, did you check the file section of this website? As well as theinternal ir data base on your remote.
Rob
|
|
| Post 3 made on Monday January 13, 2003 at 20:39 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,822 |
|
|
Supposedly the RF antenna disables the IR sensor on the front, so remove the RF antenna and it should accept IR signals. Getting the IR commands is another problem.
|
|
| Post 4 made on Monday February 17, 2003 at 14:49 |
Rick Alm Lurking Member |
Joined:
Posts: | February 2003
2 |
|
|
Low and behold you are correct. I just removed the antenna and bingo my IR remote works.
FYI Tivo owner (Tivo/Mute for 5 seconds) .. then 1163
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
