A plea for help.

Does anyone have a copy of the Swish Autoglide Remote control codes. Know known as Silent Gliss Autoglide Remote. Letsautomate used to have the codes listed but as they don't sell the units they don't list the codes anymore.

I can't find them in the files section on this site and I can't locate them elsewhere on the web.

The curtain rail is arriving this week and I want to get them programmed into my Pronto ASAP. And would prefer to avoid the learning and cleaning of the codes.

Does someone have these, can someone point me to them on the web. I confess to not looking at all of the Internet, it is rather large these days. Can someone email these to me.

Regards
Dave Goodfellow

Best bet is to send an e-mail to letsautomate - they're good people and will help if they still have the info on file somewhere.

Jim L

Jim,

Thanks, I have learnt the codes but they look dirty, so dirty in fact that I can't see how to clean them. I guess I will mail Letsautomate I just thought I would try the forum first. Those guys are trying to run a business. I have used their advice before to scope a project which unfortuately didn't go ahead.

Thnaks Again

Dave

Dirty Codes if anyone wants them.

Open
0000 0070 0000 0032 0080 0041 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0031 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0031 0010 0031 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0ad6

Close
0000 0070 0034 0000 007f 0042 000f 0032 000f 0032 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0031 0010 0010 0010 0010 0010 0031 0010 0031 0010 0031 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0ad9 002e 0004 0001 0042

Stop
0000 0070 0064 0000 0080 0041 0010 0031 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0031 0010 0010 0010 0031 0010 0031 0010 0031 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0ad5 0080 0041 0010 0031 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0031 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0031 0010 0010 0010 0031 0010 0010 0010 0010 0010 0010 0010 0011 000f 0032 000f 0010 0010 0031 000f 0011 000f 0032 000f 0032 000f 0032 000f 0032 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0041

Dave,
I have sent you a set of clean (synthetically generated) codes for all 4 sets of autoglide codes. (Allows independent control of three tracks). Also sent DIY instructions for adding IR control to K600 control units.
Ron