| Post 1 made on Monday July 1, 2002 at 23:22 |
Recently I tried to add a new device to my TSU6000. Everything works fine in the emulator, but when I downloaded it to my remote the new screens show up garbled. Some of the icons are partially visible, and selecting them results in the correct behavior.
I tried upgrading my firmware. This has happened with multiple CCF files for the same device.
Any ideas?
|
|
| Post 2 made on Tuesday July 2, 2002 at 03:32 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
This happens when you 'convert' a monochrome CCF to color by double clicking on it to start ProntoProEdit. You do not get asked to convert the icons and they end up being stored in 2-bit color format rather than 8-bit. The emulator can handle these images but not the Pro.
The correct way to convert a mono CCF is to start ProntoEdit then use Open to browse to the mono CCF.
Of course you should switch to ProntoEdit 4.03.
I don't know of any way to fix your current CCF, other than delete and replace each bad icon.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
