| Post 1 made on Thursday June 27, 2002 at 11:44 |
Anyone else have this experience? A Pronto Pro used in conjuction with the RF unit. The power gets interrupted, and the RF unit needs to have its channel changed back and forth to work again. We have a system installed that I personally interrupted the power and had the problem, and another that's been working for a while, and now suddenly isn't. (The system that's been working for a while is partially IR as well, and that part works fine.) Is it a defective RF box? Do they all do it?
|
|
| Post 2 made on Thursday June 27, 2002 at 12:39 |
bomberjim Super Member |
Joined:
Posts: | September 2001
3,894 |
|
|
I had that problem when I initially set up my system. Had to change the base unit from channel 0 to 1 and then back before it started working. Since then, it's worked fine - even though power has been interupted several times. Jim L 
|
Jim L  |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
