| Post 1 made on Wednesday May 29, 2002 at 12:53 |
Hi there. My TSU1000 just broke (got stepped on, spider crack on the screen), so I bought a new TSU2000. I just opened it and am trying to get my original TSU1000 CCF file into it. I've got the new pronto edit 4.0.3 I also updated the firmware in the TSU 2000. Anytime I try to download any ccf file to the remote, I get an "error downloading configuration into RC device" message, which I can't get by now. Uploading from the remote seems to work fine so I think the comm port if working. How do I get by this eror and get my original tsu1000 ccf into the tsu2000 cleanly?
Thanks in advance.
|
|
| Post 2 made on Wednesday May 29, 2002 at 17:17 |
Have you rebooted after upgrading to 4.0.3? I have found that if I tap the home key every 2 seconds while the PC is trying to connect, It works every time.
|
|
| Post 3 made on Wednesday May 29, 2002 at 20:12 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
You might also give PE2 a go. Some people appear to be having new comms problems with PE4.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 4 made on Thursday May 30, 2002 at 01:45 |
PE2 worked for me. I was having the same problem.
|
|
| OP | Post 5 made on Thursday May 30, 2002 at 23:01 |
I tried PE4 on 2 different desktop machines and it didn't work. I installed it on my laptop and it worked fine. Weird. Thanks for the suggestions anyway guys (or girls).
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
