I may have a way to discretely turn on/off HD out from a Toshiba HD sat receiver , testing in a few at cussers.
I'll keep ya posted.

This message was edited by kabster on 05/24/02 13:37.02.

Yes it works but my laptop powerplug broke off inside and shorted my laptop, power supply works but not laptop :-(

All you have to do is :
1) Make 3 buttons, action is 1, hd on is 2, hd off is 3 lable them accordingly.
2) Learn action on action.
3) Put the tv and sat receiver in the hd off mode,
press action then learn hd/input on hd on button you made.
4) With hd on tv and dss press action then learn hd/input to hd off button you made.
5) make two more buttons and lable them HD/ON, HD/OFF.
6) Ailias HD/ON to action , delay ,hd on.
7) Ailias HD/OFF to action , delay ,hd off.

You can do this many ways without the need for the second set of buttons , or on just two buttons .

If anyone can decript this and verse it better Please Do.
(must speak kabble though)
Im goin out to meet the boy's and watch cv dance hahhaaha just kidding cv don't kill me
c,sea,see ya latter

This message was edited by kabster on 05/24/02 21:02.12.

Actually, there is a much simpler way of doing this, and it yields you discrete codes.
Create 2 buttons, this is all you need.

Push action (Toshiba remote), push the first button to be learned(Pronto) , then push HD/SD (Toshiba remote)

Push action (toshiba remote), push second button to be learned (Pronto), then push HD/SD

you now have both the hd and sd discrete codes, and there is no need to preface them with an action command. You just have to put the remote into use mode and then test it to see which one is which. The remote alternates between these two codes each time you activate the action button.

best,

easton

This message was edited by eastonaltreee on 05/27/02 23:46.17.

you still need 3 buttons , Action , hd on , hd off.
action is needed for ppv and other things , so I was correct you need 3 buttons :-)