| Post 1 made on Sunday March 17, 2002 at 17:03 |
Richard_E Founding Member |
Joined:
Posts: | March 2002
24 |
|
|
I've found a repeatable problem - my prontoEdit crashes when I run the emulator after pasting in hex codes. I'm also unable to download it to the pronto because of some error (seems to be related).
When I remove the code and use a learned command or just replace it with a delay, emulator works, and I can download it. But whenever there is just a [C] for the action, it won't work.
I'm running Edit 2.0 on WinXP.
Thanks in advance!
|
|
| Post 2 made on Sunday March 17, 2002 at 17:23 |
JohnFox Founding Member |
Joined:
Posts: | March 2002
75 |
|
|
The download part I'm not sure about but here is some info on the emulator problem [Link: remotecentral.com]I thought there was a faq on this...?
|
|
| OP | Post 3 made on Monday March 18, 2002 at 11:37 |
Richard_E Founding Member |
Joined:
Posts: | March 2002
24 |
|
|
Thanks for taking the time to answer, even though this apparently has been covered repeatedly. With your help, I was able to get the code pasted into v1.05 and then merged with v2.0 and it all works beautifully.
Thanks again!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
