Ok, I know there is a timer function but that isn't what I am looking for.

Also, I want a sleep timer that will do an all system off function.

So, with that said. Is there a way to do this other than making a few panels that have multiple delays?

It is a pain in the butt, but I was thinking that I could just put in the max delay 99.9 seconds. Which is 1.67 minutes. So, if I put in 18 delays of this length, it would be roughly 30 minutes. Then I could make a panel for 30, 60, 90, 120 minute sleep times. Finally alias it all to my all off button.

Is there another way to do this?

the only way to do what you want is with delays, but when the delay is running you cannot use the Pronto (if you stop it the sleep function will be killed) if you do do it, I would go with 90 sec = 1.5 min so 10=15min or 20=30 and then use that for the sleep timer

Here are some alternatives

1) make a timer button that ends at a given (exaggerated) time like 4 am
2) just have one timer (must be on the macro side), but you edit the time
2) make a timer panel, on the macroside with non active timers (no days selected) then all you need to do is in edit mode add the day (todays), so if it is 10 and you want in one hour you activate the 11 button (you can find an example on my Pro CCF [Link: remotecentral.com]