| Post 1 made on Monday October 1, 2001 at 23:46 |
JSB Founding Member |
Joined:
Posts: | September 2001
5 |
|
|
I've read the past threads and still can't figure out how to use these on the new DPX-1 projector. I wish this were worked out and posted as a CCF but no such luck yet. I found the hex codes on the Yamaha site that look like: Power off D1 C0. I converted them to decimal codes that would be 209 for all Custom Codes (all are D1) and a number between 192 and 248 for all the second numbers. I then downloaded Barry Gordon's IRDB and Glen Clapps IRTool but i could not understand how to use them. Could someone walk me through converting "Power Off" D1 C0 = 209 192 into something the pronto will use? Thanks. Jeff
|
|
| Post 2 made on Tuesday October 2, 2001 at 09:20 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,798 |
|
|
1) learn the IR code off of one of your remotes button
2) (in IR Tool) copy the code and paste it in the box marked Hex Code
3) press the decode button
4) change the command # to 192 for off
|
... |
|
| Post 3 made on Tuesday October 2, 2001 at 13:41 |
Andrea Whitlock Welcome Back |
Joined:
Posts: | June 1999
1,209 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
