I have 3 Home theortor setup's and my whole house is x-10'ed. Can I have the main screen select what room I am in then go to sub, main menue screens for that room and conponents and audio settings? So if I am in the livingroom the audio volume goes to my onkyo, vs the basement where my audio volume would go to the dennon.

Yeah. I normally do 4 home pages. The first screen asks what room you're in, the others have the source selct macros for each room. You can hide the pages if you want, so you can only get to the pages witha button press (instead of the up and down arrows).

Learn your volumes and mute under the Properties section for each device, not for the home page. That way, when you go to the device specific for the room you're in, the volume buttons will apply to that receiver. As soon as you pick a device for another room, the volume buttons will then apply to that receiver. Looks a little gnarly when you're building it, but it works like a champ.

I assume you mean you want to be able to select the room. If you were Bill Gates you could have the room programmed to tell the remote where it is, but most of us are not quite in that price range.

This message was edited by Joel Warren on 09/28/01 21:22.23.