| Post 1 made on Monday September 24, 2001 at 08:27 |
JoAnn Eubank Founding Member |
Joined:
Posts: | September 2001
27 |
|
|
I recently got my Pronto Pron and everything worked fine. Today the green lights starting flashing on the Charger and the battery does not seem to have recharged fully. All things mentioned in the maunal were checked and they continue to flash. Has anyone had this problem and how do youi fix it? Does it indicate a bad battery or docking station? The connector was checked, it is ok.
|
|
| Post 2 made on Monday September 24, 2001 at 18:44 |
John Pechulis Loyal Member |
Joined:
Posts: | July 2001
7,127 |
|
|
No flashing red and blue lights? Oh, the flashing green light, that means GO!
Sorry, just a little humor.
Try removing the battery pack and re-inserting it. Sometimes that will clear up the problem. I've had the same problems with RC5000i's straight out of the box.
Hope this helps,
JJP
|
|
| Post 3 made on Monday September 24, 2001 at 19:56 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,766 |
|
|
The ProntoPro is quite a bit different than the RC5000i in terms of connector. :-) I've only ever had the lights flash once, and that's when it was not properly "locked" into the connector.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
