I have a Sony TV (model KV-32FS12. I checked the files but did not see this model listed.

I have been able to program the Pronto 2000 for this TV. How do I set ProntoEdit so that I have the same model in it?

I also checked the files and found no documentation at all for Pronto Edit. How does one add buttons?

Also, how do I check the Pronto for the current firmware status?

forgive all the questions but without any kind of am manual Pronto Edit is a real challenge.

I think the best way to start is download & digest the "Unofficial Philips Pronto / Marantz RC5000 FAQ" from here:

[Link: remotecentral.com]


You can also download manuals from here:

[Link: remotecentral.com]

Good Luck!

This message was edited by Barry Shaw on 08/13/01 19:14.47.

Go here and download the ProntoEdit User manual:

[Link: pronto.philips.com]

Between that, the FAQ and Daniel's review, you should have no problem.

Nice advice JOEL... if that is your real name...

This message was edited by Barry Shaw on 08/13/01 19:25.06.

To check the firmware: Click and hold the little Pronto icon for a couple of seconds to enter the setup menu. Once there scroll down to the third page to read your firmware version.

And you had to edit that message, Barry. Sad!

My name....JOSE JIMENEZ!!