With desired icons on rc5000i such as cable station icons, how do you make the individual buttons/icons go directly to that specific channel. What is the proper steps in order to make that work correctly.

1) add a button
2) load the appropriate icon under active unselected
3) go to the action tab
4) click on alias
5) a pop-up menu-tree will show up
-- a) click the device (that the wanted number appears on)
-- b) click the panel (that the wanted number appears on)
-- c) click the channel number (or type it)
-- d) click on the OK button
6) repeat steps 4 and 5 until you have the whole number (parts a and b will be much shorter)
7) test it out, if it works well you are finished if the number is not correct you might need some delays. (not all equipment is equal)

To add a delay click on delay, you can change the amount of time by typing in a new number and pressing OK
you can move the delay (and anything else in the list) using drag and drop
Note: Some devices need longer delays between same numbers (like 11)
If you notice you need a delay between numbers add as step 5.2