| Post 1 made on Tuesday May 8, 2001 at 10:25 |
Hi all-love the forum, some really great info!!
First question is about frames. I have started to setup my TSU2000 and am using a frame system I really like but the left sidebar is too narrow. Right now I have the small device icons for jumping to the devices on the left sidebar, but they are a bit too small. I want to use the med or large icons but the sidebar needs to be wider, and I can't find a wider frame piece, so I want to create my own.
Second question is about switching to devices, I know I have seen this someplace but have forgotten what it said. When I press the device icon for TV, PreAmp...etc it switches to that device, but the Pronto sends out a power signal. If the device is on it turns off and vice versa. How can I get the pronto to stop doing this when switching to the new device?
Thanks in advance!
Tony
|
|
| OP | Post 2 made on Tuesday May 8, 2001 at 10:31 |
tramahound Historic Forum Post |
|
|
do you use prontoedit? i think, as far as the power function, you can open the particular device buttons there and disable the power function and leave the Jump function as is...
|
|
| OP | Post 3 made on Tuesday May 8, 2001 at 10:47 |
Martin Historic Forum Post |
|
|
Tony,
From the "Properties" panel of the given device, remove any action from the "Action" tab. This will resolve your switching problem.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
