| Post 1 made on Monday May 7, 2001 at 14:46 |
Philips didn't mount the LDR component, that allows an automatic backlighting according to surrounding brightness, in RU 890.
I added it : it 's recognized by the software (in setup pg 2, the light sensor really works), but the problem is that the firmware is provided to work without the LDR ; so the light sensor scale is locked to the middle of the range to allow the manual setting (in setup mode). Does someone already tempted the adventure and have a solution to recover a full range setting possibility ?? Thanks by advance.
|
|
| OP | Post 2 made on Monday May 7, 2001 at 15:30 |
Martin Historic Forum Post |
|
|
Marc,
Did you try an old version of the firmware still available from the ProntoEdit site (don't forget to backup your ccf file before performing the update)?
Also, where did you get your LDR component?
Thanks.
|
|
| OP | Post 3 made on Monday May 7, 2001 at 16:04 |
Anthony Historic Forum Post |
|
|
I have an old Pronto TS1000 that came with a light sensor, and even with the new firmware it works. But if you want to try older firmwares you can find all of them here [Link: remotecentral.com]
|
|
| OP | Post 4 made on Monday May 7, 2001 at 20:45 |
Martin Historic Forum Post |
|
|
Does that mean that it is not software but harware dependent?
|
|
| OP | Post 5 made on Tuesday May 8, 2001 at 08:55 |
Anthony Historic Forum Post |
|
|
It could just be some kind of model number, the same way that the edit software knows your remote is a Pronto or RC5000
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
