| Post 1 made on Friday May 4, 2001 at 20:20 |
Kenneth Epstein Historic Forum Post |
|
|
I am the new owner of a Pronto, and a Macintosh user (so no Prontedit (sic)). I can't seem to get the Pronto to reliably learn T770 codes, particularly on device buttons.
I have searched the Forum on this question, but have not found the answer.
Thanks,
ken
|
|
| OP | Post 2 made on Friday May 4, 2001 at 21:39 |
kabster Historic Forum Post |
|
|
Try using a learning remote to learn the codes then teach pronto with that
nad resets prontos
i use sl8000 to learn pronto any nad codes.
Kevin
|
|
| OP | Post 3 made on Friday May 4, 2001 at 22:42 |
Kenneth Epstein Historic Forum Post |
|
|
This sounds like a very difficult method, and I bought the remote because I had difficulty programming the NAD IR sequences into my sl9000.
Thanks,
Ken
|
|
| OP | Post 4 made on Saturday May 5, 2001 at 06:16 |
Kenneth, if you scoot over to NAD's faqs: [Link: nadelectronics.com]they tell you how to do it - aren't they nice? Dom
|
|
| OP | Post 5 made on Saturday May 5, 2001 at 07:41 |
Kenneth Epstein Historic Forum Post |
|
|
I tried the method on the NAD page, but couldn't get it to work consistently.
Thanks kabster. After complaining about your method, I went back to my sl9000 and used the code setting for NAD. I then taught them to the Pronto. I still can't get Video4, because I can't find it on the sl9000.
Ken
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
