Does anyone have any discrete codes for the Hughes-JVC G11 projector? I've tried creating ON/OFF codes using the JVC receiver discretes listed at this site, but they had no effect.

Actually, the ones I would really like are the ones to change the Aspect ratio. I've created macros in the pronto for doing it but currently, it requires:
MENU
Down arrow (4 times)
OK
Down arrow (7 times)
Right arrow (toggles from 4:3 to 16:9)
BACK
BACK

Now, with a required 300ms delay between the arrows and 500ms each time the menu changes, it takes several seconds for the entire sequence to complete. Although it's not something that I execute often (once per movie, maybe) it can really mess things up when even a single IR gets missed.

My wife (not bashing here, I've done it too!) has a tendancy to push a button and then set the remote down. Then, I have to spend several minutes undoing whatever wrong settings got changed.

I know that there are many discrete settings that can be done through the RS232 port on the projector, but that wouldn't be practical for me.

Any ideas would be appreciated.