| Post 1 made on Friday February 9, 2001 at 07:28 |
I scanned an image to be put on an RC5000i. But when I tried to load the image into the icon screen it said cannot do because bitmat has to be 1,4,6, or 8. I did all the other basic commands such as 240x219, etc. Can anyone help me w/ this problem. Thanks
|
|
| OP | Post 2 made on Friday February 9, 2001 at 09:13 |
The bitmap has to limited to 256 colors (8 bit) or less. Use a paint program to reduce the picture's colors and RC5000setup will automatically convert the bitmap to black and white.
Still, a better way is that in Paint Shop Pro (and I'm sure other programs out there) you can build a palate using the four colors the RC5000 uses. Once created, developing a bitmap from scratch becomes alot easier as what you creat is truely what you get when loaded into the RC5000i. You can also apply a palate to an existing bitmap.
|
|
| OP | Post 3 made on Friday February 9, 2001 at 20:39 |
I thought that I had tried to convert, but not to sure. I will try again and see what happens. Thanks for your response.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
