When I try and set up for my Panasonic PV7664 VCR, the codes I'm using appear to be be "off" in function. For example when I press "3" button, the number "5" is selected. When I press "8" I get a power toggle.

I've used both KM and RM to generate the files, to the same effect. I have got numerous other devices working without problems. For this VCR I got the codes form Devices4.xls for VCR-1162. That code mostly works correctly when I use that instead of a custom upgrade on the remote. One wrinkle - The Devices4.xls gives hex codes. I converted these to EFCs using various other CCF files etc as a guideline. Sometimes the least sig nibble of the LSB is different between the origianl hex and the EFC translated hex.

Am I missing somehing obvious here?

Thanks,
gny

Particulars:
Remote: URC-9660
Protocol: Panasonic VCR Combo
Device: 144
Subdevice: 0

Some example codes (from RM):
Func EFC Dev SubDev OBC Hex
Num 5 116 144 0 20 d7 00
Num 6 120 144 0 21 57 00
Num 7 118 144 0 22 97 00
Num 8 122 144 0 23 17 00
Num 9 245 144 0 24 e7 00
Ch up 148 144 0 52 d3 00
Ch dwn 152 144 0 53 53 00
Pwr Tog 024 144 0 61 43 00