Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 2
Topic:
NevoStudio Pro 2.0.0.974 (Final) ready for download !
This thread has 23 replies. Displaying posts 1 through 15.
Post 1 made on Wednesday March 4, 2009 at 18:24
benbau
Long Time Member
Joined:
Posts:
March 2005
13
Tried several times, but could not succeed in downloading the complete package. Download stops at 22.6 MB. Installer reports failed integrity check......

P.S.
Updating from within 1.1 (is that English?) does work!

Last edited by benbau on March 4, 2009 20:06.
Post 2 made on Wednesday March 4, 2009 at 23:51
cpchillin
Select Member
Joined:
Posts:
September 2007
2,239
I just updated with no problem. Then again I only went from 2.0 to the new one and I updated by opening the NP and updating via tools.
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;)
Post 3 made on Thursday March 5, 2009 at 01:08
motech
Super Member
Joined:
Posts:
August 2008
3,374
so this is the real release?
i dont see it on the website but i know they can be slow . .
Post 4 made on Thursday March 5, 2009 at 10:14
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
i cant wait to try out the 2 way rs232 devices 
[Link: facebook.com]
Post 5 made on Friday March 6, 2009 at 09:39
aajacobs
Long Time Member
Joined:
Posts:
December 2008
15
After downloading NevoStudio Pro 2.0.0.974 and run the installer
I get an Error.
Text:
Installer integrity check has failed.Common causes include incomplete download and damaged media. Contact the installers's
author to optain a new copy.
More informatio at:
[Link: nsis.sf.net]
Post 6 made on Sunday March 8, 2009 at 14:46
cdnxpat
Long Time Member
Joined:
Posts:
November 2006
23
same here cannot get the file to work 39.7 mb
cdnxpat
Post 7 made on Sunday March 8, 2009 at 14:50
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
it worked for me.  but i installed it through the update button inside the studiopro program.
[Link: facebook.com]
Post 8 made on Sunday March 8, 2009 at 15:30
DA INFERNO
Lurking Member
Joined:
Posts:
January 2009
8
On March 8, 2009 at 14:50, Duct Tape said...
it worked for me.  but i installed it through the update button inside the studiopro program.

x2
Post 9 made on Sunday March 8, 2009 at 15:43
cdnxpat
Long Time Member
Joined:
Posts:
November 2006
23
weird it tells me thatthere's an update available start the update closes the software does a couple of recycling servers and .......nothing
checked all connections / stopped the firewall / avast off / etc...
any ideas ??
cdnxpat
Post 10 made on Sunday March 8, 2009 at 15:48
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
the software download/installation takes forever.  when it looks like it is done and just sits there with the scrolling ones and zeroes, it is still working.  even though it looks like it is locked up.  just let it go for about a half hour.
[Link: facebook.com]
Post 11 made on Sunday March 8, 2009 at 15:53
cdnxpat
Long Time Member
Joined:
Posts:
November 2006
23
yes ok will try again however I'm getting error message check network connections
so I'm getting time outs maybe too busy
will try later
thanks
cdnxpat
Post 12 made on Sunday March 8, 2009 at 15:56
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
in that case, you have issues.  did you try restarting your computer?  i had that error a long time ago, and a restart fixed it.
[Link: facebook.com]
Post 13 made on Sunday March 8, 2009 at 15:58
cdnxpat
Long Time Member
Joined:
Posts:
November 2006
23
will do right now thanks
love version 2 just a few bugs
and also tried it on win 7 works great except a few bugs with graphics
cdnxpat
Post 14 made on Sunday March 8, 2009 at 18:01
Darude
Long Time Member
Joined:
Posts:
February 2009
13
will there be a standalone 2.0 install? Ive got Vista x64 and im not able to install 1.0 on my computer.
OP | Post 15 made on Tuesday March 10, 2009 at 14:45
benbau
Long Time Member
Joined:
Posts:
March 2005
13
Still no complete download possible, only 22.4 of 81,4 MB.
Seems to be related to a short validity of the download certificate.
Sloppy.....
Page 1 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse