Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Adding Nevo S70 to Nevo Connect(Problem)
This thread has 3 replies. Displaying all posts.
Post 1 made on Wednesday May 11, 2011 at 07:12
Sinan87
Long Time Member
Joined:
Posts:
May 2011
11
i have a nevo connect with nevo remote programmed correctly.Now,I am trying to add a new remote(S70) to the existing nevo connect network,but it asks me to press (add) button on the primary controller,then (program) on the nevo s70 remote.

What's the primary controller? and where's the (add) button?
Thank you in advance,
Post 2 made on Thursday May 12, 2011 at 17:09
rbhfan
Active Member
Joined:
Posts:
March 2003
634
The add button on the remote is on the screen in the configuration menu which is accessed through the little drop down bar at the top of the screen. normally you put the remote in find mode and then you have 30 seconds to press the button on the base station which is located right next to the screw on antenna. I would suggest having a pencil or something slender to push that button with.

But to start with you need to have both remotes assigned to the base in studio pro using the same file just add a second remote to the configuration and either program it exactly the same or make whatever variations you need to.
One thing I have learned in this industry. It is easier to pull a wire than it is to push one.
Post 3 made on Wednesday June 6, 2012 at 08:33
drogot
Lurking Member
Joined:
Posts:
January 2005
6
Hi,
I have a q50 and nevo connect working fine. I want to add another q50 with a different configuration. Do I need to do more than download the desired config to the new q50 with the nc connect in the job, or do i need to physically "find" the connect by pressing the button on the back?
Thanks ,
Dave
Post 4 made on Monday July 16, 2012 at 02:34
sydinstaller
Active Member
Joined:
Posts:
February 2004
740
Drogot,

You can only use one config file.
You can have many remotes and many connects but they MUST be programmed as the one JOB file.

The programming does not need to be the same on each remote but they MUST be in the same single job file.

D.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse