Anyone ever try and program Mitsubishi Mr. Slims (Climate Control Units) on a Nevo Q50?

I learn all the commands but for some reason the unit does not respond to the IR of the Nevo - I then programmed the same units to a Logitech Harmony and it worked just fine.

Anyone?

 try teaching the nevo the codes using the harmony.

Sorry I should have mentioned that I tried that too with no luck-

Just for the record: Every other device i have programmed is using the Nevo Connect (RF) and the MrSlim is using IR - that should be no issue right?

 are you sure that you have the ir routed properly?  you don't have the mr slim assigned to the "front" on the nc50 by chance?   the mr slim should not be assinged to anything on the nc50, then the commands will be sent via the ir blaster on the remote itself.   

use a  camera to verify that ir is coming out of the remote when a mr slim button is pressed.  a camera phone works fine for this purpose.  

if you have it routed properly and ir is coming out of the remote, then email me a file with the codes you have learned.  i can teach them to my pronto and convert them to hex and see if anything looks funny.

how do i test with the camera ?

greatly appreciated!

also: its not configured for the front of the nevo connect nor any other inputs --

also, how do i email you the codes?

many many thanks in advance ...

I see the IR in my phone camera

How do i email you the codes ?

save the device into your personal library, then create a new file and add that device to the file.    or if it is easier, you could send me the whole file and I can extract the codes myself.  my email is in my profile.

Great, will do it later tonight and shoot it over to ya -

Im looking for a ccf file with the Mr. Slim codes or better yet, the Hex codes. Anyone have those? Thanks.

Did you ever get these codes?

My Mr.Slim still wont work with Nevo for some reason ... driving me crazy

I thought Mr. Slim air conditioners used RF codes. I may be wrong but if they are RF codes, no way to learn or use them in the Nevo.

Dave
RemoteQuest.com

The unit I have is IR - I was able to learn them with Harmony and an old RTI remote I had laying around. Also tried learning the codes from the Harmony (and RTI) to the Nevo - no luck - very odd ...

[Link: shop.designerplumbing.com]

this is the unit

 i also tried helping dugan out by learning the codes into my pronto to view the hex form of the codes.  something was funky with the codes.