| Post 1 made on Monday December 31, 2001 at 03:45 |
jman Founding Member |
Joined:
Posts: | December 2001
2 |
|
|
My computer will not recongnize my remote. I have disconnected and reconnected the remote from the computer. I have tried both com port hook ups and I have disconnected all other com port devises all with no positive results. Is there something Im missing related to the remote or does this sound like a problem with my computers com ports? Let me know what you think. Thanks
Jay
|
|
| Post 2 made on Monday December 31, 2001 at 08:59 |
Jeffinhisroom Founding Member |
Joined:
Posts: | December 2001
3 |
|
|
Hi,
This may be a dumb question but have you checked the device manager to see if your com ports are listed? I know many PC's have them turned off in the BIOS or there might be a conflict that never gets taken care of cause they don't get used much.
Jeff
|
|
| Post 3 made on Thursday January 3, 2002 at 17:51 |
Matt Reiland Founding Member |
Joined:
Posts: | August 2001
54 |
|
|
Jeff might be suggesting that you have HotSync or other palm computer software running that would tie up the port even if nothing was connected to it??
|
|
| Post 4 made on Sunday January 13, 2002 at 14:21 |
billhol Founding Member |
Joined:
Posts: | January 2002
4 |
|
|
I manually changed mine in the registry.
Export a backup copy before you begin!
[HKEY_CURRENT_USER\Software\Philips Electronics N.V.\NEOedit\1, 3, 4, 0\Settings] Connection =
I went through them one at a time and finally 3 seemed to talk to COM2:.
It works fine for upload and download now.
Courtesy of Phil (not my fix but it works!)
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
