Your Universal Remote Control Center
RemoteCentral.com
URC's Consumer Remotes Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 2
Topic:
New forum for URC's Complete Control models!
This thread has 15 replies. Displaying all posts.
Post 1 made on Thursday August 31, 2006 at 04:01
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,742
With the recent changes by URC to their Complete Control series, it would seem appropriate for us at Remote Central to split our forums into two separate topics, to better reflect the company's dual market strategy.

First will be a new forum targeted to all of their Complete Control branded products including the MX-350, MX-650, MX-850, MX-900, MX-950, TX-1000 and MX-3000, plus the new MSC-400. It will be the place to discuss advanced programming, variables, graphic techniques, troubleshoot any integration issues and so forth.

This second, existing, forum will be repositioned to cover all of URC's consumer models, such as the R5, R7, RF-10, RF-20, RF-30, URC-100, URC-200 and URC-300 - along with all forthcoming consumer remotes (hint, hint). This forum will also continue to cover legacy Home Theater Master products including the SL-7000, SL-8000, SL-9000, MX-500, MX-600, MX-700, MX-800 and MX-1000... although I expect that there may be a bit of cross-traffic on the MX-700 and MX-800.

So, if you have a new question relating to one of URC's Complete Control models, be sure to post it in the new Complete Control forum.

Also, please note that any topics relating to URC's new policies should remain here - although I feel at this point that anything that can be said has already been said.
Post 2 made on Thursday August 31, 2006 at 04:28
GregoriusM
RC Consultant
Joined:
Posts:
December 1999
9,804
Great idea, Daniel!

I've posted in the new Complete Control section, and it seems I also have the honour of posting first in this thread!

Let's all move along and support the people using URC's remotes in the best way we can!

Greg :-)
When ignorance is bliss, ‘tis folly to be wise.
Post 3 made on Thursday August 31, 2006 at 09:15
CCD
Super Member
Joined:
Posts:
August 2005
2,731
Thanks Daniel! Well Done!
Post 4 made on Thursday August 31, 2006 at 10:24
surge
Long Time Member
Joined:
Posts:
November 2003
107
There are currently some active topics with good information in this forum that should be moved to the new forum. Who is able to move topics to other forums? If you'd like help, I'll volunteer to be a thread mover for existing topics and new topics which may incorrectly end up here.
Post 5 made on Thursday August 31, 2006 at 10:31
OTAHD
Super Member
Joined:
Posts:
October 2005
4,679
Daniel's really the only "moderator" on this site, and it's probably his duty.
LET'S GO BUFFALO!!!
Post 6 made on Friday September 1, 2006 at 13:03
Eric Johnson
Universal Remote Control Inc.
Joined:
Posts:
May 2001
705
Daniel,

The changes look great! Everyone at URC will continue to participate in both forums.

Best Regards,


-Eric
Best Regards,
Eric
Post 7 made on Monday October 9, 2006 at 18:13
Steve Hilliar
Lurking Member
Joined:
Posts:
August 2005
6
I see there still has been no update to the MX3000 programing manual since 2004.
I understood the company was going to rewrite it so dumb people like me could learn to programe their expensive investment!
Steve
Post 8 made on Monday November 20, 2006 at 23:13
8ate8
Advanced Member
Joined:
Posts:
November 2005
778
OK, anyone else realizing that this split was a really bad idea? I mean, if they were listed right next to each other like the Pronto forums it wouldn't be that bad, but I see questions about the 950 and 3000 in this forum, and the 700 in the other forum.

The way I see it, why split up the MX800 from the MX850? They're identical remotes.
Post 9 made on Tuesday November 21, 2006 at 15:47
OTAHD
Super Member
Joined:
Posts:
October 2005
4,679
No, I don't think it was a bad idea. They're seperate product lines. And the 800 and 850 are different remotes. The 850 is overall much better than the 800.
LET'S GO BUFFALO!!!
Post 10 made on Tuesday November 21, 2006 at 17:46
GregoriusM
RC Consultant
Joined:
Posts:
December 1999
9,804
On November 20, 2006 at 23:13, 8ate8 said...
OK, anyone else realizing that this split was a really
bad idea? I mean, if they were listed right next to each
other like the Pronto forums it wouldn't be that bad,
but I see questions about the 950 and 3000 in this forum,
and the 700 in the other forum.

The way I see it, why split up the MX800 from the MX850?
They're identical remotes.

I think that slowly the threads in each forum will be about the remotes that belong in them.

You might still see the DIY'ers posting here about their Control Remotes, just as you see some posts in the Pronto forum where the question is asked in the wrong forum.
When ignorance is bliss, ‘tis folly to be wise.
Post 11 made on Friday November 24, 2006 at 16:00
8ate8
Advanced Member
Joined:
Posts:
November 2005
778
On November 21, 2006 at 15:47, OTAHD said...
And the 800 and 850 are different remotes.
The 850 is overall much better than the 800.

Besides redesigning the arrow buttons and changing the color, tell my why a question about the 800 should be in a separate forum from the 850?

If anything, the forums should be broken up into PC programmable remotes, and non-PC programmable remotes. A programming question about the 700 is just as much related to the 800 and 850.
Post 12 made on Sunday January 21, 2007 at 17:36
VCI
Lurking Member
Joined:
Posts:
January 2007
1
We would like to get more information on how IR Codes work, programing, designing, and how we can retrieve the IR codes from the manufactures.

Also, we are using the Universal Remote Control MX-850 with the 250 transmitter. We have a Samsung HL-R6168 TV and Samsung HD-950. The TV has a anynet port and GLINK. Can we use one of these ports and plug them into the IR output of the transmitter? We would like to avoid using the IR emmitters that stick to each devices IR emmitter.
Post 13 made on Sunday January 21, 2007 at 18:12
OTAHD
Super Member
Joined:
Posts:
October 2005
4,679
Try starting a new thread.
LET'S GO BUFFALO!!!
Post 14 made on Monday January 22, 2007 at 10:25
8ate8
Advanced Member
Joined:
Posts:
November 2005
778
And yet it continues... questions about the wrong remotes being posted in the wrong forums.....
Post 15 made on Wednesday April 18, 2007 at 11:22
reza_se
Lurking Member
Joined:
Posts:
April 2007
1
i have an urct-48b-01 model
but its manual isnot english so i cant use my remote control
were can i finde an english version
Page 1 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse