My 3000 will sometimes repeat codes for my Replay TV 5040. It seems to sometimes send the command twice, which can get really annoying going thru menus. I checked every setting in the software and cant find something that changes this behavior. Anyone have an idea?

1) You're sure that you don't have the code set to Repeat?

2) Try recalibrating your screen. You might just be accidentally pushing the button twice. You'd be surprised how recalibrating the screen on virtually any touchscreen device can do wonders!

3) Are they Learned or IR Database codes? If it is Learned, try Learning again. If IR Database, try Learning the codes that you are having the problems with.

Sometimes things that "shouldn't" work, actually do. I've been in the Computer Sys. Admin. position long enough to find that out!!!

Let us know how you do.

4) Another quick thought. You might want to actually set up those code to 2 in the REPEAT box. This is another thing that defies logic, but just may do the trick.

5) Thoughts are popping up......... Are you using RF? If so, try turning off the IR or at least the IR blaster since you might be getting a "double hit" of the code..... one from the remote itself, and one from the blaster, and possibly one from the flasher you have on your Replay.

Try this out, and maybe give us a little more information on how your MX-3000 is "connected" to your Replay?

Greg

Yeah they are pre programmed (DVR 075) and repeat is on 1. I unchecked Repeat While Button is Pressed and it seems ok now. Weird since i only press the hard button once (4 way and select). Oh well. thanks for the help!

Thanks for letting us know what did the trick!!! These tips can be VERY helpful for other users!