Is the MX-3000 compatible with Lutron lighting control systems (grafikeye)? I want to control lights in my room...what is the best equipment to buy to work with the MX-3000? I was considering Lutron but want to make sure it's compatible. Please inform....Thank you!

The IR codes are in the database for the MX-900 editor and I believe all the MX remotes use the same IR database so you should be fine with Lutron.

Lutron has Grafik Eye, Spacer System, Spacers and Maestro controls

All should be in the databases, The Grafik Eye has hidden scenes as well..5-16, these are setup through the buttons so you can set a few hidden scenes for movies and entertaining that wont messed up by others playing with the front controls

Wives like to adjust them when your gone...this way they are always set the way you like them

Lutron is very good about getting their IR commands to third-party manufacturers. I've used Maestro IR, Spacer and GrafikEye - all populated from the URC database.

The one thing you will want to do is get IR to the dimmer(s). Run some Cat5, in order to extend the IR emitters. That's the only major consideration you need to make. Of course, you will need an MRF-300 or MSC-400, in order to send IR.



Thank you,
Damon DG
= = = = =
http://www.ProRemotes.com - Authorized Dealer & Remote Programming Services