| Post 1 made on Friday December 23, 2005 at 09:51 |
GKP1 Long Time Member |
Joined:
Posts: | December 2005
10 |
|
|
I recently bought an MX850 and have completed programming with one exception - the "off" command for my receiver (Harmon Kardon AVR110), which I cannot seem to get to work whatever I do. The receiver's remote has an 'off' button and I have even tried to have the MX learn the code from that remote, but it still doesn't work. Any suggestions? Thanks.
|
|
| Post 2 made on Friday December 23, 2005 at 10:54 |
tippy-tie Long Time Member |
Joined:
Posts: | July 2004
479 |
|
|
receiver model #?
are you using ir or rf?
are you connecting to a rear ir jack?
|
|
| OP | Post 3 made on Friday December 23, 2005 at 11:08 |
GKP1 Long Time Member |
Joined:
Posts: | December 2005
10 |
|
|
Receiver Model # is Harmon Kardon AVR110. I am using RF w/ 300 base station and blaster to the front of the unit. All other commands are working except for power off. thanks
|
|
| Post 4 made on Friday December 23, 2005 at 12:02 |
Surf Remote Loyal Member |
Joined:
Posts: | July 2001
5,958 |
|
|
|
| OP | Post 5 made on Thursday December 29, 2005 at 09:46 |
GKP1 Long Time Member |
Joined:
Posts: | December 2005
10 |
|
|
The OFF command on p. 3 unfortunately does not work. I assume that by learning the code from the original remote that should be sufficient, but that does not work either. Any suggestions are much appreciated, I am out of ideas. Thanks
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
