| Post 1 made on Sunday April 24, 2005 at 09:39 |
Musta10000 Founding Member |
Joined:
Posts: | August 2001
6 |
|
|
One of my SL-9000 remotes is acting up funny. It looses the punch through for the TV volume daily. After I re-punch through it works for a day or so. I wanted to see if it return to normal operating mode after clearing the total memory. The manual does not explain how I could do a total clearing of all programmed information. It only explains how to clear certain functions like macros and punch through.
I would like to start from scratch as if it was new. Can you help in explaining how I can get it to that status.
Thanks !
|
|
| Post 2 made on Sunday April 24, 2005 at 17:49 |
Steve Garn Senior Member |
Joined:
Posts: | November 2003
1,319 |
|
|
That and the macro loss is our biggest problem on the 200 plus SL-9000's we have in the field (we're glad we mostly do 850's now).
If you're loosing the punches this often AND you have brand new batteries in the remote, I assume it's defective. I sure wouldn't clear the memory and start over unless I absolutely had to.
I'd run it by tech support at URC first.
|
Manuals?! We don't need no stinking manuals! a.. er.. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
