| Post 1 made on Saturday September 11, 2004 at 18:23 |
jbaustin Lurking Member |
Joined:
Posts: | September 2004
2 |
|
|
I almost have my MX-500 all setup with the help of IRCLONE-MX. The only thing I can't get to work is the PLAY, STOP, PAUSE, <>, <<>> buttons. I have gone through several learn processes and can't get it to work. I even tried different remotes that work fine with my Sony DVD player and learned the code that way. Still the DVD Player does not respond to my buttons when I press them. I do have the device set to SONY-DVD-33 as the device codes go. I was able to get the DVD buttons to work in the LCD area where they were learned, but can't get them to work on the standard buttons. Any ideas why this isn't working? I have a SONY DVP-CX985V 400 Disk player.
JB
|
|
| Post 2 made on Saturday September 11, 2004 at 18:31 |
dcolver Long Time Member |
Joined:
Posts: | February 2003
22 |
|
|
I'm having the same problem with Sony SLV-D950 video/dvd combi. It'll go back for a replacement brand if I can't get it to work tomorrow.
|
|
| Post 3 made on Saturday September 11, 2004 at 19:05 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,822 |
|
|
There's prbably a punch through enabled, you might not have done it, but sometimes enabled out of the box. try this:
1. main and ent
2. punch
3. play
4. dvd
5. dvd again
|
|
| OP | Post 4 made on Sunday September 12, 2004 at 00:25 |
jbaustin Lurking Member |
Joined:
Posts: | September 2004
2 |
|
|
That did it Edmund, the Punch through settings were messing up the buttons at the DVD level. Drove me nuts trying to get that to work correctly. Thanks!!
JB
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
