I have a Philips 27PS60S TV. I have been having problems teaching my mx500 from the original remote. Buttons do not repeat right or will not cycle the PIP correctly. So I went with one of the Philips TV codes from the built in table of the mx500. Problem is that I am not able to copy and paste these. I still don't have all the buttons I need, but it was a start. I have tried the book method and the short and long hold of the original remote buttons. No luck so far.

Question is: Is there another program or way to move the preprogrammed table codes around to where I want them in the page?

There is an applet called MX500 Learn Utility written by one of the forum members. I believe it's in the library. You can use it to "learn" difficult codes from the OEM remote and copy/paste the converted code to the appropriate IRClone 500E button. Saved my bacon a couple of times.

Well I got it figured out some what, thanks your reply Garrett and to this thread here: [Link: remotecentral.com.]

Using the learn utility I was able to edit the codes by adding a dummy key to the end of the repeat burst. ie: stop or arrow key code.

Still have a few to go and a couple that still are being troublesome, but I have successfully fixed several using this method.
Again thanks for the help Garrett.