As I mentioned in a previous thread, URC confirmed that the 3-packs of MX-700/200s will only come with one cable.

To make your own cable without soldering, click the following link: DIY MX-700/1000 Cable.

By reversing the red and black leads, this cable could be used for a Pronto as well.

Mike
Surf Remote Control





This message was edited by MikeSRC on 05/17/02 01:23.43.

Very good sir! Did you come up with this all by yourself? You are very smart Mike! :-)
Does this mean you are getting ready to sell the MX-700's now?

You'll be the second to know, Ken. ;-)

FYI - I tried this out on an MX-1000 and a 200 (no 700 yet), and it worked fine on both. You can always solder the connectors, or buy the D-sub socket with solder terminals for the same price. Because of the small size of the socket I don't recommend the soldered connectors unless you have a fair amount of soldering experience.