| Post 1 made on Thursday August 15, 2013 at 17:07 |
mnrok1 Lurking Member |
Joined:
Posts: | August 2013
3 |
|
|
MX700 is old I know, but got a new Home Theater and cannot use the programming cable because:
New computer. No serial port. Only have a 15 pin D sub that went to the monitor.
Can I use this 15 pin port if I get a sub 15 pin D sub from Radio Shack and which pins do I use from the 1/8" stereo plug?
The tip, the middle and the base of the 1/8" plug go to which pins on a 15 pin D sub.
Thank you
|
|
| Post 2 made on Thursday August 15, 2013 at 23:38 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
You need a USB serial adapter, like the following: [Link: amazon.com]
|
|
| OP | Post 3 made on Friday August 16, 2013 at 18:03 |
mnrok1 Lurking Member |
Joined:
Posts: | August 2013
3 |
|
|
Thanks Edmund, have ordered the keyspan adapter and a USB to Serial adapter cord. Hope it works!!!!
|
|
| OP | Post 4 made on Wednesday August 21, 2013 at 23:05 |
mnrok1 Lurking Member |
Joined:
Posts: | August 2013
3 |
|
|
The Adapter worked great...was able to program the MX700 with no problem.
THANKS EDMUND!!!!
|
|
| Post 5 made on Thursday August 22, 2013 at 00:02 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
You're welcome, glad I could help. :) I have the same adapter.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
