| Post 1 made on Sunday March 29, 2009 at 13:01 |
Jackie77 Lurking Member |
Joined:
Posts: | November 2008
8 |
|
|
I purchased a URC-R50 and absolutely cannot find a code for DVR625. All my other devices are OK. I've tried all codes on the R50 and nothing will work.
Anybody have a code/solution for this?
Thanks
|
|
| Post 2 made on Sunday March 29, 2009 at 14:13 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,822 |
|
|
Make sure the Dish receiver is IR, then make sure its set unit/address #1. Of it 16 addresses available to Dish receivers, usually the only one found in universal remotes is #1.
|
|
| OP | Post 3 made on Sunday March 29, 2009 at 16:03 |
Jackie77 Lurking Member |
Joined:
Posts: | November 2008
8 |
|
|
"Make sure the Dish receiver is IR, then make sure its set unit/address #1. Of it 16 addresses available to Dish receivers, usually the only one found in universal remotes is #1"
Please tell me how to do this....
Thanks
|
|
| Post 4 made on Sunday March 29, 2009 at 16:36 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,822 |
|
|
Read the DISH manual, this coming from 14 year Directv subscriber. I can't tell you how to do it, I have never used a dish receiver.
|
|
| OP | Post 5 made on Thursday April 2, 2009 at 18:20 |
Jackie77 Lurking Member |
Joined:
Posts: | November 2008
8 |
|
|
I still can't seem to figure this thing out. I have the R50. Programming the TV, VCR, and DVD was a breeze. But I'm puzzled about programming the Dishnetwork 625 with the R50. Am I supposed to use the SAT mode on the R50? I tried both the Disnetwork and Echostar setups. Nothing works. IR is set to #1.
Anyone have a solution to this? Any help would be appreciated!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
