I've been using an MX-800 & MRF-200 for years to control my system. As of yesterday my direct tv receiver now seems to get duplicate IR commands. Channel up one results in two. Menu command brings it up and then removes it etc. Re-Uploaded my remote and RF/Ir config with no change. Changed IR emitters with no change. Changed ports on the MRF-200, no change. Sheilded the IR emitter and then varied the unsheilded hole size, no change and also varied the location of the emitter. Help! Any ideas? It seem like the direct tv receiver has become over sensitive to the IR commands.
All DirecTV receivers are subject to automatic downloads of new software from the satellite. It's possible your receiver got some change that is affecting IR processing.
I'm a member of the Remote Central community, just like you! My comments here are my own, and in no way express the opinions, policies, or plans of Universal Remote Control, Inc.
It might help if you posted which model of DirecTv receiver you have, but it's simple enough to check if there was a s/w update recently using your setup screen.
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.