| Post 1 made on Sunday April 2, 2006 at 02:32 |
Can anybody help me with this please?
|
brent |
|
| Post 2 made on Sunday April 2, 2006 at 13:33 |
SirKalle Long Time Member |
Joined:
Posts: | January 2003
130 |
|
|
can you be a bit more specific, please?! :-)
|
|
| OP | Post 3 made on Monday April 3, 2006 at 00:24 |
Well I've updated my firmware and that was fine, then I updated the programing software, and lost the ability to lable my buttons! I haven't down loaded to the remote sence then for fear of screwing everything up. I know from experience that it can be a while before I can get back online. Any isight to this would be greatly appreciated.
|
brent |
|
| Post 4 made on Tuesday April 4, 2006 at 16:37 |
SirKalle Long Time Member |
Joined:
Posts: | January 2003
130 |
|
|
Hi Brent,
never heard about such a problem, so sorry!
You cannot label your buttons in iProntoEdit? Or you cannot learn your buttons?
You can download the information any time from iPronto into iPronto Edit to play with. Save it using a different filename (I do it any time because I had a corrupt file once).
Only the upload TO iPronto can "damage" the configuration, however, damage means here: logical problems. You can upload it again if you experience problems ....
Sorry, I still don't get your problem .... :-)
Best regards,
Kalle
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
