HI!
I am french living near Paris, and I speak english not very well!
I have buy a I Pronto from USA
This is a TSI 6400
I have a MMC Card 256 MB Transcend.
This card was not detect by the I Pronto.
It is write : please use MMC cards only and make sure the card is properly inserted.
How can I do to use this MMC Card?

Hi there,

There is an extensive discussion about this here:- [Link: remotecentral.com]

In a nutshell, it looks like there is a size limit on the MMC cards that iPronto is capable of recognising. It seems that only very small cards (I think 64 Mb, although I think one person managed to use a 128 Mb card if I remember correctly) are able to be used.

Check out the above link for more detailed help with this though.

Try using the reset button on the rear of the unit with the card installed. I am using a 256 MMC without any problems, but I had to do a reset with the card installed.

Hope this helps!

John



On 09/23/05 05:40 ET, Goshdarnit said...

Hi
I do what john say to me
It don't work!!!!
Have you some othe ideas?