| Post 1 made on Wednesday July 6, 2005 at 12:44 |
Sebastien Long Time Member |
|
|
I am a new user for iPronto and I would like that somebody helps me for the following: How would it be possible to transfer the IR code from the ipronto to the iprontoedit file after learning the IR code from a given remote control? thanks. Sebastien
|
|
| Post 2 made on Wednesday July 6, 2005 at 14:34 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,870 |
|
|
I have not used iProntoedit in a long time and don't have it in front of me. But in iPE there should be two icons one called download and one called upload. If you click upload it should upload to the PC the config in the iPronto
|
... |
|
| Post 3 made on Wednesday July 6, 2005 at 15:52 |
SirKalle Long Time Member |
Joined:
Posts: | January 2003
130 |
|
|
Hi Sebastien,
right, just lern a few buttons with your iPronto. Then start iProntoEdit. From there do an "upload from pronto". Now you have everything in the iPronto Editior and can doubleclick the button, then doubleclick "learned IR code" and finally you see the hex codes. You can then copy them to other buttons or use them in different programs.
Best regards,
Kalle
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
