Post 1 made on Sunday November 9, 2003 at 02:44 |
mkenyon Lurking Member |
Joined: Posts: | November 2003 8 |
|
|
I currently have a ProntoPro and using ProntoEdit I can directly enter RC5 codes. I do this by selecting the "Advanced" option on the "Add IR" screen and then typing the code into the "System" and "Command" boxes (eg. System=19, Command=16). I do this because my equipment uses RC5 codes and is not covered by the standard database.
I would like to be able to do the same using an iPronto and iProntoEdit but I can't see how you would do this. iProntoEdit doesn't seem to allow you to define device types and brands that are not in the database and it doesn't seem to offer the same facilties for direct entry of RC5 codes as is possible with ProtoEdit.
Does anyone know if this can be done and if so, how?
Thanks Mike
|
|
Post 2 made on Sunday November 9, 2003 at 04:18 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,785 |
|
|
Can't be done. Not in ProntoEdit NG either. But, if you copy/paste the hex code generated in regular ProntoEdit, it should work.
|
|
OP | Post 3 made on Sunday November 9, 2003 at 04:58 |
mkenyon Lurking Member |
Joined: Posts: | November 2003 8 |
|
|
Thanks for your quick reply Daniel. This sounds like a step backwards, at least as far as I am concerned.
|
|
Post 4 made on Monday November 10, 2003 at 00:44 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,785 |
|
|
I suppose they figure that not many people would need to enter codes this way - they'll just learn them.
|
|
Post 5 made on Monday November 10, 2003 at 08:50 |
cinergi Long Time Member |
Joined: Posts: | August 2003 34 |
|
|
I have learned codes into my pronto pro and they work. I then learn the same codes into my ipronto running the latest firmware and they don't work.
Only after doing a copy and paste from pronto edit into ipronto edit do the codes work.
Doug
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.