Your Universal Remote Control Center
RemoteCentral.com
Philips iPronto Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Ipronto and IEEE802.11g
This thread has 8 replies. Displaying all posts.
Post 1 made on Friday October 31, 2003 at 19:30
Vincent
Long Time Member
Joined:
Posts:
October 2003
58
Anyone know of any plans by Philips to produce iPronto with 802.11g capability? Is there a way to ungrade an 802.11b to g?
I want to get an iPronto, but really would want the speed of g.
Post 2 made on Friday October 31, 2003 at 19:39
aimdoug
Long Time Member
Joined:
Posts:
April 2003
39
From what I've heard Phillips plans to upgrade the Ipronto to use 802.11g. At the present time we are still stuck with 802.11b. I'm not sure the Ipronto will be any more usefull with G support but I will upgrade when its available.
OP | Post 3 made on Friday October 31, 2003 at 19:52
Vincent
Long Time Member
Joined:
Posts:
October 2003
58
Thanks for the quick response.
I guess the functionality will be the same, but maybe quicker for downloading and surfing.
Post 4 made on Saturday November 1, 2003 at 01:20
Anthony
Ultimate Member
Joined:
Posts:
May 2001
28,872
it would need a firmware update, but since it uses an external (seperate) card, an upgrade uption should be simple
...
Post 5 made on Saturday November 1, 2003 at 10:03
cinergi
Long Time Member
Joined:
Posts:
August 2003
34
I think the ipronto downloads and surfs slowly because of things like processing power, memory, and current firmware capabilites. Typical broadband internet connections range from 1-3 mb/s. 802.11b is capable of 10 mb/s so in theory, ugrading to 54 mb/s 802.11g shouldn't speed up surfing and downloads at all. I recently upgraded my wireless network from 802.11b to 802.11g and the only thing that was faster (and noticeably so) was file transfers from one computer to another. Web surfing and downloads so no speed increase.
Post 6 made on Sunday November 2, 2003 at 03:54
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,780
My 802.11b wireless notebook is MUCH quicker surfing than the iPronto (on the same network). I hope they can optimize the speed more, as 400MHz should be more than enough for speedy browsing...
Post 7 made on Sunday November 2, 2003 at 09:48
bassfiend
Long Time Member
Joined:
Posts:
September 2003
149
I hope that there is a path to 54g not for the increased bandwidth but because if I run 802.11b devices here on my 54g AP then the AP falls back to a lower speed mode and so it buggers up DVD playback from the server on my laptop across the wireless LAN.

I could just put in another AP I guess - shame I gave away my old 802.11b AP!!!

Phil
Post 8 made on Sunday November 2, 2003 at 18:11
tintruder
Long Time Member
Joined:
Posts:
April 2003
106
802.11g requires the 32-bit Cardbus interface while 802.11b can run quite happily on the 16-bit PCMCIA bus.

If the iPronto is wired for 32bit expansion, it ought to be only a driver upgrade.

However if the electronics are based upon PCMCIA, it would be a significant hardware revision.
Post 9 made on Sunday November 2, 2003 at 23:40
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,780
From what I've heard it's merely a driver issue, figuring out what cards they can support with drivers with limited memory.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse