| Post 1 made on Sunday August 3, 2003 at 16:54 |
Ted Gatlin Founding Member |
Joined:
Posts: | February 2002
321 |
|
|
Does anyone have or know how to get a discrete code to access the "disk selection" by number on the Pioneer DV-F727 DVD/CD changer?
I am trying to set up a macro to select a dvd by pushing a button.
Thanks in advance for any help!!!!!
|
|
| Post 2 made on Thursday August 14, 2003 at 08:29 |
Bruce Sinclair Active Member |
Joined:
Posts: | April 2003
694 |
|
|
You will have to build a macro consisting of the following commands: stop, .1 delay, stop .1 delay, stop. 1 delay, search, .1 delay, the disc number with a .1 delay between each digit,.1 delay, and play. I have built some DVD jukebox programs using the Pioneer DVF-07 DVD changer that work well. I could send you a copy of one of the programs that have all of the macros for discs 1 through 600 (using two changers)pre built for a color pronto that can be converted the IPronto. A jukebox program uses tons of pages and requires lots of page jumps.
|
Bruce Sinclair CMB Integrations LLC DMC-E
"Those who are most critical, often have no real skills themsevles" |
|
| Post 3 made on Sunday September 28, 2003 at 01:48 |
neil allison Lurking Member |
Joined:
Posts: | September 2003
2 |
|
|
I'd be keenly interested in getting the code for the 600 disc. Was about to takle that and help would be appreciated. thanks so much
|
|
| Post 4 made on Sunday September 28, 2003 at 11:34 |
neil allison Lurking Member |
Joined:
Posts: | September 2003
2 |
|
|
Bruce, should have mentioned I can be contacted at [email protected]. Thanks for any help you might be able to give. brand new at this.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
