| Post 1 made on Friday July 11, 2003 at 22:15 |
After I upgraded to the lastversion of the software on mi iPronto I can not change the DNS server address in the network panel. I go, write the address, save, but when I go back and is blank again.
If I go to the Manual configuration (resetting and holding down the wheel) the DNS number is correct and thus I can connect to the Internet, but in normal operation mode I can't. I tried to switch to DHCP but then again it writes a wrong DNS number which I can not edit.
Can somebody help me?
Thanks
|
|
| Post 2 made on Sunday July 13, 2003 at 13:00 |
I am having the same problem but I am using encription. The software inserts a dash in 2 places in the encription. When I remove them and store the changes it re inserts them. I called Phillips support July 11th they said they would be back to me within 24hrs. I have not gotten a call back yet. I have tried DHCP but the 6400 does not receive the info, even though I have 4 other IP devices working and getting DHCP info from the same router. I am looking for help also.
|
|
| Post 3 made on Friday July 18, 2003 at 02:17 |
I just upgraded to 1.4.5 and am having the same DNS problem. DNS numbers and Domain Name information are accepted but not stored. I reported the problem to Philips Tech Support on the Pronto website and I will post their response as soon as I get one -- correction -- IF I get one!
|
|
| Post 4 made on Friday July 18, 2003 at 02:22 |
primo Long Time Member |
Joined:
Posts: | June 2002
126 |
|
|
I had the same problem. what i did is completly reboot the remote...
I unpluged the battery and when it came back on all the data I had on there when it worked came back...
primo
|
|
| Post 5 made on Thursday July 24, 2003 at 03:28 |
It seems the DNS issue is solved with the latest firmware that they put online a couple of hours ago 1.4.8
|
|
| Post 6 made on Thursday July 24, 2003 at 22:23 |
Great! But how do you get 1.4.8 on the iPronto if you can't set the DNS and connect to the internet? Any suggestions?
|
|
| Post 7 made on Friday July 25, 2003 at 03:44 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,785 |
|
|
First tell it you want to update the firmware. When it reboots, hold down the SCROLL button right away (for a while). It will present a menu. Enter in all of your network/wireless settings MANUALLY and then continue. Should work.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
