| Post 1 made on Friday August 11, 2006 at 13:03 |
DennUs Lurking Member |
Joined:
Posts: | August 2006
2 |
|
|
I have the 885. Here's my question. Sometimes when I flip channels it skips over some. So, going from channel 6 to 3 should take three presses. But it goes from 6 to 5 to.... and 3. So, it skips 4. I think the commands are send too fast or too slow. I can fiddle with the delays, but I don't know which one to adjust. I use the Dreambox satellite receiver. Dennis
|
|
| Post 2 made on Friday August 11, 2006 at 15:38 |
jlet Super Member |
Joined:
Posts: | March 2004
2,631 |
|
|
Try reducing the "number of repeats" under Device > Troubleshoot > Show me more problems > Device doesn't appear to receive every command correctly > The device responds too much to some commands (for example, volume up increases the volume too quickly).
Note: I don't know why this feature is buried so deep.
|
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000 |
|
| OP | Post 3 made on Friday August 11, 2006 at 19:29 |
DennUs Lurking Member |
Joined:
Posts: | August 2006
2 |
|
|
Okay, I will try this. Thanks!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
